Aeon Lava


Out of stock

Categories: ,
Information about “AEON Shisha – Edition 4 – Lounge Lava”

The new AEON Shisha – Edition 4 is the successor to Edition 3 and has been developed and continuously tested for over a year. The AEON hookahs are produced in Germany under the highest quality requirements from V2A stainless steel (1.4305 V2A stainless steel from Switzerland) near Stuttgart and then every component of the AEON hookah undergoes another strict quality control in our warehouse. The production of the hookahs in Germany is carried out with the certification ISO 9001 and ISO 14001 and each thread is checked on site for its accuracy of fit. The AEON Shisha bowls are hand-blown by hand and then checked for quality in our warehouse and glued with a high-quality 2-component adhesive. So when you buy an AEON Shisha, you can be sure,

Edition 4 – Lounge scope of delivery

– Head adapter with M16x1 thread

– Charcoal plate (hand-ground from V2A stainless steel)

– 18/8 ground joint on M16x1 adapter

– Smoke column with 29/2 cut below (M14x1 thread inside for attaching to the base) and 18/8 cut above

– Base with a connection including closed chamber and blow-off valve on the smoke column

– 1 x hose end piece with shortened 18/8 cut

– 4 x sleeves including 6mm ball for blowing out

– Immersion tube with M14x1 thread above and below

– Bowl with thread

How does the Edition 4 – Lounge differ from other hookahs?

For Edition 4, we have developed a new blow-out valve that guides the smoke upwards along the smoke column. This system also works if you attach other columns of smoke to the Edition 4 (eg with the optional “base adapter”). We also offer other smoke columns that are compatible with Edition 4 and that allow the position of the exhaust valve to be changed. The entire technology of the blow-out valve is elegantly hidden in the base and is hardly visible from the outside. The base has a 29/2 cut, which means you can customize Edition 4 according to your wishes. For example, other columns of smoke with a 29/2 cut fit into the base without any problems and you can adapt the appearance of your shisha at any time. The smoke column that is included with Edition 4, is first inserted into the 29/2 joint of the base and then screwed to the immersion tube with M14x1 thread. Since the smoke column has an 18/8 cut at the top, you can also attach a molasses catcher or other components with an 18/8 cut and adjust the height of Edition 4 according to your wishes.

How does the Edition 4 Lounge differ from the other Edition 4 variants?

The Edition 4 – Lounge is specially designed for use in hookah bars. Few components, a simple structure but a modern, simple design with a beautiful blow-out valve (as with the other Edition 4 variants) ensure that the Edition 4 – Lounge is a real eye-catcher in every Shisha Lounge. A diffuser was specifically omitted here, as one likes to hear the shisha “bubbling” in hookah bars. A suitable diffuser for the Edition 4 is optionally available and can be attached to the immersion tube of the Edition 4 – Lounge without any problems. The smoke column consists of one part and is left in the base with a 29/2 joint and then screwed tightly to the immersion pipe so that the Edition 4 – Lounge could also be carried on the entire smoke column. There is an 18/8 cut under the plate, so that the coal plate can easily be removed, for example to change the head. Molasse catchers could also be attached if required. A shorter immersion tube could also be attached for Edition 4, the immersion tubes of the different versions are compatible with each other.

Would you like to test the Edition 4 – Lounge for your hookah bar?

Then simply contact us by e-mail at  [email protected] or via WhatsApp +49 15140510670. We will provide you with an Edition 4 lounge free of charge for 2 weeks in return for a deposit. If the Edition 4 – Lounge arrives undamaged after the 2 weeks have elapsed, we will refund the deposit. Please note that this offer is only valid for operators of a shisha lounge,  not for private customers !

Dimensions of the hookah:

Height: approx. 53 cm

Weight: 4.20 kg

IMPORTANT NOTE:  Please note that all of our glasses are handmade and may differ in color and color gradients. The images displayed on the website are only sample images. Please also note that, due to time constraints, we unfortunately do not have the opportunity to choose a bowl of your choice based on your colors. Since all bowls are handmade, it is possible that small air bubbles can be found in the glass. If you are dissatisfied with your bowl, please contact us. Please note that we can only exchange your bowl if the bowl has not been used and you are responsible for the shipping costs. Please note the cleaning and care instructions as well as the assembly instructions on www.setup.aeon-shisha.com.

Weight 5 kg
Dimensions 10 × 4 × 12 cm


There are no reviews yet.

Be the first to review “Aeon Lava”

Your email address will not be published. Required fields are marked *

Shopping Cart